Description

READY TO USE

The CMeX40 is ready to use with no configuration required in the field. It can be connected to a CMe Series master, or any M-Bus master following the M-Bus standard. The CMeX40 can control up to 230 VAC 8A.

STANDARD OPEN PROTOCOLS

The standard open protocol design works with any software supporting the M-Bus standard. It allows any existing M-Bus system to use the product without any proprietary solutions.

COST EFFECTIVE

The modular and expandable design allows the customer to select a suitable level based on price and functionality. The low initial cost and the possibility to add modules to existing installations provide a future proof solution.

Technical data

Mechanics
Material
Polyamide
Protection class
IP20
Dimensions
90 x 65 x 36 mm
Weight
80 g
Connection M-Bus
EIB standard solid wire connection 0.6 to 0.8 Ø mm
Power supply
Screw terminal. Cable 0-2.5 mm2, 0.5 Nm tightening torque
Mounting
DIN mounted
Electrical
Power consumption (nom)
1.5 mA M-Bus 1T
Installation category
CAT 2
Output relay current (Max)
8 A
Output relay voltage (Max)
240 VAC
Input loop max resistance
1 kΩ
Input type
Normally open
Input minimum open/close time for pulse detection
20 ms
Environmental
Operating temperature range
-30 to +55 °C
Storage temperature range
-40 to +85 °C
Operating humidity max
80 % RH temperatures up to 31 °C, decreasing linearly to 50 % RH at 40 °C
Pollution
Degree 2
Operating altitude
0-2000 m
Usage
Indoor use only, can be extended with IP67 enclosure for outdoor use
User interface
Green LED
Power
Red LED
Error
Push button
Test of relay output
M-Bus
M-Bus standard
EN 13757
M-Bus baud rate
300 and 2400 Bit/s
M-Bus command
SND_UD, SND_NKE, REQ_UD2
Approvals
EMC
EN 61000-6-2, EN 61000-6-3

Downloads

Product sheet
CMeX40 Product sheet CMeX40 M-Bus I/O module product sheet
Manual
CMeX40 User's manual CMeX40 DIN-Mounted M-Bus I/O module user's manual
CMeX40 Quick manual CMeX40 DIN-mounted M-Bus I/O module
Certificates
CMeX40 Declaration of conformity CMeX40 Declaration of conformity

Knowledge base

No knowledge base downloads found.

About Elvaco

Elvaco is a manufacturer and independent supplier of communication equipment and software for collection, processing and presentation of metering data. We deliver high-performing M-Bus masters and slaves for reading of electricity, district heating, water and any other meter following the M-Bus standard.

Contact

Phone: +46 300 30250
Fax: +46 300 18440
Support: +46 300 434300

Contact Form

Elvaco AB
Teknikgatan 18
434 37 Kungsbacka

Newsletter

Terms of use | Quality policy | Environmental policy | Help

Copyright © 2011 Elvaco AB. All rights reserved. Design bureau Vasadu